3-Ply Single-use Face Mask

Product Single-use Face Mask

Model UHC-P201

Specifications 175x95mm (+/- 2%)

Layer 1

25gsm Non-woven fabric

Blue

Layer 2

25gsm Melt-blown fabric

White

Layer 3

25gsm Non-woven fabric

White

Ear loops

2.8mm dia. fabric elastic band

White

Nose bar

3mm width plastic wrapped zinc bar

White

Hygiene Standard No. GB 15979-2002

Performance Standard No. Y/CTCA7-2019
                                                                 EN14683-2019 TYPE ii R

Components : Non-woven Fabric, Melt Blown Fabr ic, Elastic Earloop , Nose Clip.

Usage Single-use mask to cover mouth, nose and chin for protection against dust, bacteria, smoke and pollen.

CAUTION:

1. For daily hygiene use

2. Check packaging for production date, expiration date before use.

Not recommended for use if expired.

3. Check packaging for defects.

Not recommended for use if mask package seal is broken.

4. Remove mask and stop usage immediately if allergy symptoms occur.

5. This product is for single, daily use only, do not re-use.

Dispose in accordance to local regulations after use.

6.Avoid touching inner and outer surface of mask at all times.

7. Change recommended after every 4-6 hours of use

Box size: 185 x 100 x 85mm

OPP transparent poly bag

Specification of conformity Pass certificate

Packing: 50 pieces/box (Sterilized and individually packed), 40 boxes/carton

5-Ply KN95 Respirator

Product Particle Respirator

M odel KN95

Layer 1

40gsm Non-woven fabric

White

Layer 2

50gsm ES Hot air Cotton

White

Layer 3

25gsm Melt-blown fabric

White

Layer 4

25gsm Melt-blown fabric

White

Layer 5

40gsm Non-woven fabric

White

Ear loops

5mm width fabric elastic band

White

Nose bar

5mm width plastic wrapped double zinc bar

White

GB2626-2006

Product Construction: Cover body, nose clip,

ear loop

Storing Conditions:

Relative humidity less than 80%.

Store the mask in a non-corrosive, ventilated environment.

Points for Attention:

1. This product is not to be used if packaging is damaged.

2. Do not use in environments with less than 19.5% oxygen,

as this respirator does not supply oxygen; Not for use in oil mist

atmospheres.

3. If the product becomes damaged, soiled, or breathing becomes

difficult, leave the contaminated area immediately and replace the

product.

4. This product is one-time use only and cannot be washed.

5. This product should be stored in a clean, dry and ventilated

environment with relative humidity less than 80% and free of

harmful gases.

Box size: 135 x 130 x 175mm

OPP transparent poly bag

Products instruction: Instruction sheet

Specification of conformity Pass certificate

Packing: 10 pieces/box (Sterilized and individually packed), 80 boxes/carton